Close
    OVERVIEW

    MATERIALS

    Build robust production parts, jigs, fixtures, factory tooling and functional prototypes with the Stratasys F900. It uses a wide range of thermoplastics with advanced mechanical properties so your parts can endure high heat, caustic chemicals, sterilization and high-impact applications.

    For more details on the specific materials handled by the Stratasys F900, refer to FDM Thermoplastics.


    SPECIFICATIONS

    System Size and Weight

    2772 x 1683 x 2027 mm (109.1 x 66.3 x 78.1 in); 2869 kg (6325 lbs.)
    With Manufacturing Light Tower: 2772 x 1683 x 2281 mm (109.1 x 66.3 x 89.8 in.)

    Build Size

    914.4 x 609.6 x 914.4 mm (36 x 24 x 36 in)
    Platen supports two build zones for either small or large build sheets.

    Layer Thickness

    • 0.508 mm (0.020 in): ASA, ULTEM™ 1010 resin
    • 0.330 mm (0.013 in): ASA, ABS (M30, M30i), PC (all types), ULTEM™ resin (all types), FDM (all types), FDM Nylon 12CF, ST-130
    • 0.254 mm (0.010 in): ASA, ABS (all types), PC (all types), ULTEM™ resin (all types), PPSF, FDM (all types)
    • 0.178 mm (0.007 in): ASA, ABS (all types), PC (all types), FDM Nylon 12
    • 0.127 mm (0.005 in): ASA

    Accuracy

    Parts are produced within an accuracy of +/- .089 mm or +/- .0015 mm per mm (+/- .0035 in. or +/-.0015 in. per in.), whichever is greater.

    Z part accuracy includes an additional tolerance of +/- 0.000 mm slice height.

    Note: Accuracy is geometry-dependent. Achievable accuracy specification is derived from statistical data at 95% dimensional yield. See the Fortus 900mc accuracy white paper for more information.

    *See Fortus 900mc Site Prep Guide for detailed power and environmental specs.

    DOCUMENTS

    FDM Systems 3D Printers

    Production-Grade Strength

    Compare FDM 3D Printers span sizes, applications and material capabilities.

    Read More

    For more details, please contact your regional sales representative.

    ULTEM™ is a registered trademark of SABIC or its affiliates.